Fixed step size

[trucker]

When combining EcoCal with Simulink, the Fixed step size/basic sample time in the solver screen of Simulink is always reverted to 0.001 sec although some other setting such as 0.01 sec are selected. How can I set the fixed step size/basic sample time of Simulink to 0.01 sec which is our desired setting?

[Terry Xu]

Hi there,

Will you use EcoCoder v2.9.6R5?

In versions before V2.9.6R1, Fixed-step can only be 0.001, but in versions after V2.9.6R1, Fixed-step can be modified.It supports 0.001, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, and 0.5 if the selected target is MCU, and any value if the selected target is EcoCoderAI

Thanks!

[trucker]

Thank you for your reply and we understand it.

Btw, I can only find the EcoCoder manual linked below:
https://ecotron.ai/Public/EcoCoder%20Manual%20_4.9.2.pdf

Could I have the latest one? Ver.4.9.2 was last updated on 1/28/2021.

[Terry Xu]

Sure, we will send you the latest version via e-mail.

Thanks for your supporting to our forum.

[Author]

Posts