Flashing EV2106B01

Please reach out: support@ecotron.ai if your questions didn’t get replied.

Tagged: ,

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • March 22, 2023 at 5:10 pm #22788

    UOMRacing
    Participant
    • University of Malta Racing

    We are trying to flash the EV2106B01. We are using the Kvaser device and are going through the process of flashing using EcoFlash. We saw that we needed to consult you to obtain the flashing parameters before flashing starts. What do we need to do?
    Also does Kvaser need it’s own seedkey dll for ccp programming.

    April 3, 2023 at 4:29 pm #22881

    Terry Xu
    Keymaster
    • Ecotron

    Hi there,

    Please refer to our EcoFlash Manual to set up the setting, please let me know if you have any detail questions.

    I will send you a latest EcoFlash Manual by email,

    Best,

    Terry

    April 3, 2023 at 5:59 pm #22891

    UOMRacing
    Participant
    • University of Malta Racing

    We tried following the EcoFlash Manual to flash EV2106B01 using the Kvaser device. We used the CCP Protocol with the default CRO and DTO IDs and managed to open the device sucessfully. We then opened the file also sucessfully but upon pressing “Flash” we get a Warning stating “CLEAR_MEMORY Access locked.” and flashing stops. We tried several different CCP seedkeydlls found in EcoFlash’s folder but was unsuccesfull.

    We also tried using UDS but upon pressing “Flash” and asked to Key-Cycle which resulted in nothing happening(we also tried cutting it off from the power supply completely).

    How should we proceed?

    error error ccpcanoptions ccpcanoptions
    April 4, 2023 at 9:47 pm #22896

    Terry Xu
    Keymaster
    • Ecotron

    Usually After you chose Operation-CCP SeedKey DLL then pick PG_Default.dll, it will be fixed, please confirm this solution. If it doesn’t work, please let me know and We will provide more solutions.

    Best,
    Terry

    • This reply was modified 1 year, 7 months ago by Terry Xu.
    April 5, 2023 at 5:32 pm #22902

    Jace Knott
    Participant
    • FormulaLSU

    Hi,

    We are a different team also using the EV2106B01, and I am having this same issue. I can confirm that the issue remains present after choosing the PG_Default.dll file.

    April 6, 2023 at 9:06 pm #22911

    Terry Xu
    Keymaster
    • Ecotron

    Hi all,

    We will provide a new dll file for you to flash via your register Emails.

    Best,

    Terry

    • This reply was modified 1 year, 7 months ago by Terry Xu.
    April 11, 2023 at 11:28 am #22974

    UOMRacing
    Participant
    • University of Malta Racing

    Thanks, the new dll worked.

    May 11, 2023 at 3:45 am #23316

    Luís Pedro Feio Carvalho
    Participant
    • UNICAMP E-RACING

    Hello! I represent another Team (UNICAMP E-RACING) that have the same issue, coud you send me the new DLL file? i’m trying to use kvaser leaf to flash the VCU.

    May 11, 2023 at 10:35 pm #23339

    Terry Xu
    Keymaster
    • Ecotron

    just sent you, please let me know if any further questions.

    May 12, 2023 at 4:12 pm #23345

    Luís Pedro Feio Carvalho
    Participant
    • UNICAMP E-RACING

    Thank you! the DLL worked!

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.